Garden Paving Mold DIY Path Maker Cement Brick Concrete Stone Road Mould

Description

Feature
1.100% brand new and high quality
2.Suitable for Garden Paving Mold
1. It is recommended to spray some waste oil on the inner surface of the mold to facilitate demoulding (not too much, it will cause bubbles)
2. Pour the mixed concrete into the mould
3. A vibrating table can be used in conjunction to vibrate the concrete and remove air bubbles.
4. Then place it on a flat ground and wait for it to solidify. It is recommended to be next to the wall to prevent the mold from being stretched.
5. During the period, you can prevent the concrete from cracking by adding some water
6. In summer, it can be demolded in 1 to 2 days, and in winter, it can be demolded in 4 to 5 days.
7. After it is completely solidified, put the mold upside down on the wooden board, tap it a few times, and pour out the finished bricks, and you can continue to add water for maintenance.
Function:
This is a professional floor tile mold, which is used to pour and shape floor tiles and cement tiles, and pave stone- like patterns for walking.
Suitable scene:
This floor tile mold is very suitable for laying terraces, paths, sidewalks, courtyard squares and other places, and it is convenient to shape beautiful passages.
1.material：Polypropylene
2.color：As the pictures shown
3.size：as the picture shows
Package include:1pc
Note:
Please allow minor error due to manual measurement.
The colors may be a little difference for the different monitor display.
On May 17, 2024 at 06:01:47 PDT, seller added the following information: